Sunday, 8 January 2017

25 Linux Commands and Tricks That Every Hacker Should Know 2017

Posted by Sufyan Hacker  |  at  10:06:00


1. Log Into a Linux Machine Without Knowing the Username or Password
If you come across a Linux machine that you need to gain access to but you don’t know the username or password, you can gain access by following these steps:
Restart the system and press ‘e’ or F2 to enter GRUB menu. Choose ‘ROOT’ in the options. In the command line that appears, type ‘tail /etc/passwd’ and locate the username in the text that appears. Now that you have that username, type ‘passwd USERNAME’ and enter a new password. Once finished, type EXIT, select OK to exit recovery mode, and then login with the username and new password.


2. Combining TXT files
If you have two text files with lines that are identified as below, you can join them with the following three commands. Be sure the lines match, however, and put them in the order you want the files combined.
$ cat animals.txt
100 Dogs
200 Cats
300 Lions
$ cat actions.txt
100 bark
200 meow
300 roar
$ join animals.txt actions.txt
100 Dogs bark
200 Cats meow
300 Lions roar
3. Check Out How Many Hours a Computer Has Been On
Find a system’s up-time with this piece of code. The numbers given will be listed as hours. So, for example, if it says 9.32, the system has been up for 9 hours and 32 minutes.
$ ac –d


4. View All Running Processes
Linux doesn’t have a task manager like you find in Windows. While you can download various types online, the best way to view the current running processes on your system is to open the terminal and run:
$ ps aux | more
5. Check On Total Disc Space Usage of A Directory+ Its Subs
If you’re low on disc space and you want to find out which of your directories are taking up the most space, then you can use the following command. Replace the home symbol ( ~ ) with whatever directory you want to check. For example, du -sh /etc.
# du -sh ~
6. View Active Network Connections with PID
Take a peek to see what connections are currently active on the network with this handy command.
# netstat -tap
7. Find All Files on a System Larger than X MB/GB



Say you just downloaded a 1GB+ ISO onto your system, you know it is around somewhere, but you just can’t figure out where it was saved. This little bit of code is a nifty solution for locating the file.
# find / -type f -size +1000M
8. Locate and Identify Recently Altered Files
Do you want a nice list of files that have recently been altered on any given system? If so, enter this tidbit into the terminal:
# find . –mtime -2
9. Find a Past Date
Say you need to find out rather quickly what the date was 49 days ago. To find out, type:
$ date –date=’49 days ago’
10. Find a Future Date
In the same vein as the previous example, say you need to find out what the date will be in 49. To find that out, type:
$ date –date=’3 seconds’
Note that it’s the same as the last bit, only without the word ‘ago’ added.
11. Locate Files with Specific Words in the Name

If you need to find a file on a system that has a specific name, such as ‘passwords’ or ‘taxes’, then you can search a directory with the following code:
# find ~ -name “*passwords*”
12. View Processes Run By Different Users
If you want to see what processes are running for different users that the one logged in, run this:
$ ps U oracle
13. View Items Inside Compressed (Archive) Folder
Have you ever downloaded an archive, only to discover junk inside it? The following command will reveal what is inside a zip folder before you open it.
# unzip -l var-name.zip
14: Eject Removable Media
Where it’s an iPod or an SD card, you can eject onboard media by simply typing:
EJECT
15: Save the Active Window as a JPEG

If you need to save the active window on your desktop as a JPEG but don’t want to download any special software or use PrntScrn and a photo editor, use this command:
import -window root MyTest.jpg
16: Bump User Off Network
Whether they’re doing something that is going to contaminate the network, they’re hogging resources, or you simply don’t like them, you can log a user off their computer with this handy piece of code:
skill -kill -u username
17. Block a Computer’s Access to Specific Websites
Say you’re running a business that uses Linux machines, you notice that your employees are spending a ridiculous amount of time checking the weather. You can block their ability to access those sites by opening /etc/hosts with your text editor (sudo gedit /etc/hosts) and adding:
127.0.0.1 website.com
18. Schedule Midnight Downloads
This code is incredibly handy; it allows you to schedule the time for a download to happen–say, at 3PM while you’re at work or midnight while you’re sleeping.
echo ‘wget website.com’ | at 012:00
19. Using the Terminal As Root
Using the Terminal as root is sort of like right-clicking on an application in Vista and choosing ‘run as Administrator’. It gives you the ability to do things you otherwise couldn’t do (namely, run dangerous code). To use the terminal as root, type:
sudo su
20. Disabling Password Prompt When Using Sudo

Whenever you use the ‘sudo’ command in Linux, you’re prompted to enter the user password before the command will go through. This gets annoying. The solution? Disable it. To do so, use the Terminal and type:
gedit sudo visudo
scroll down to the line that says: username ALL=(ALL) ALL
and change it to say: username ALL=(ALL) NOPASSWD: ALL
21. Change the Default Conky
If you’re using a distro that includes Conky by default, such as Crunchbang, you might wander how you can edit its settings. To do this, enter this in the Terminal:
sudo gedit ~/.conkyrc
Of course, replace ‘gedit’ with the text editor of your choice, and sudo is Ubuntu specific.
22. Put a LiveCD on a USB
Say there’s a machine you want to gain access to and copy files from, but you don’t have access to the computer’s login info. You can gain access with it using a LiveCD. The easiest way to do this is by using a USB thumb drive. You can do this by downloading a liveCD iso and then downloading UNETbootin.
Plug in your USB drive, run UNETbootin, and install the ISO with that.
23. Safely Restart Linux
Lets say you’re duped into running a fork bomb, or you download a file that promises to be one thing, only to turn out to be a massive tarbomb. How do you safely restart the frozen system? By doing the following:
Press ALT + PrntScrn and then, while holding those, type the following letters in order: REISUB.
24. View All Files (Including the Hidden Ones)
If you need to view all the files within whatever directory you’re in, including ones that are hidden, use the following bit of code:
ls -al
25: A Bonus Tip:
Never run the following:
:() { :|:& };:

…there’s something about it that begs to be run; doing so, however, will initiate a forkbomb, which will cause your system to freeze.

Source http://fearless-assassins.com

Tagged as:
About the Author

I'm a Sufyan Minhas 16 Years Old Young Boy From Lahore Pakistan. I'm a WebMaster of the Pkhackingtricks.blogspot.com. Blogger and SEO Expert. Love to serve myself by sharing Tutorials, Tips Tricks about Internet, Computer Search Engine Optimization, Blogging Ideas. Facebook Account: https://www.facebook.com/HaCkeRnCraCkeR ..

0 comments:

Subscribe
Get our latest posts directly in your email inbox.Click on RSS

Google+ Badge

Followers

Copyright © 2016 Hacking Tips and Tricks Designed By Sufyan Hacker
back to top
' type='text/javascript'/>